Firefree Class A (FFA) recently received a listing report ESR-4271 from ICC Evaluation Service (ICC-ES), confirming that our premier fire retardant coating meets all the requirements prescribed under ICC-ES acceptance criteria AC363. Building/code officials, architects, contractors/designers, engineers and the building industry rely on manufacturers who are committed to the level of quality control found in the AC363.
ICC-ES is the premier product evaluation/listing agency in North America and the most readily accepted in evaluating building products with applicable requirements of the IBC and IRC.
ICC-ES is also dedicated to developing model codes and standards (the International Codes) which are used worldwide in the design, build and compliance process to construct safe, sustainable, affordable and resilient structures. ICC-ES is accredited by both the American National Standards Institute and the Standards Council of Canada.
Firefree Coatings, Inc. is a leading developer of cost efficient fire retardant and fire resistant technologies that help prevent the spread of fire, smoke and toxic gases during a fire, thus giving time to occupants to evacuate and protecting the rest of the property from fire. Firefree coatings are tested at third party accredited International Accreditation Service (IAS) fire testing laboratories. Firefree Coatings is a member of NPFA, ICC-ES and ASTM E-05 Committee.
Firefree sells and ships products in all five continents for private, corporate and governmental projects, with customers and projects all over the world from the Americas (US, Canada, Mexico, Costa Rica, Venezuela…) to Asia (Australia, India, Indonesia, Philippines…) to Africa (Nigeria…) and the Middle East (Saudi Arabia, Oman, Kuwait…).
For further information, please contact at info@devfirefree.top, (888-990-3388) (+1 415-459-6488), www.firefree.com.

Firefree Class A qualifies for LEED Version 4 credits. FFA holds a certificate with ClearChem Registry, recognized by the US Green Building Council, in accordance with CDPH Standard Method v 1.2, 2017 emissions.

LEED v4 is the latest version of LEED. It went into effect in 2013 and is the only standard recognized for new buildings. Paints earn LEED v4 Low Emitting Materials credits for being emission certified in addition to meeting CARB SCM 2007 VOC limits. Firefree Class A is already eco-friendly as it has low VOCs (<36 gr/liter) which is significantly below California’s stringent limit of 50gr/liter. Firefree Class A’s LEED compliance builds on Firefree Coatings’ leading position as a manufacturer of environmentally friendly, green products. For further information, please contact at info@devfirefree.top, (888-990-3388) (+1 415-459-6488), www.firefree.com.

Regulatory developments in the United Arab Emirates (UAE) require that all manufacturers and supplies selling products in the UAE market provide a UAE Certificate of Compliance. FM Approvals is recognized by the UAE Civil Defense as a Certification Body. Firefree 88 Certificate is under Approval FM Class 4975 and is available to the Ministry of Civil Defense for verification and approval.

Factory Mutual (FM Approvals, www.fmapprovals.com), a division of FM Global, is a world leader in commercial property insurance and risk management. FM Approvals certifies products with a unique focus on rigorous testing and certification of loss prevention products and services.

Firefree Coatings, Inc. is a leading developer of cost efficient fire retardant and fire resistant technologies that help prevent the spread of fire, smoke and toxic gases during a fire, thus giving time to occupants to evacuate and protecting the rest of the property from fire. Firefree coatings are tested at third party accredited International Accreditation Service (IAS) fire testing laboratories. Firefree 88 is approved by FM Approvals, classified by Underwriters Laboratories (U/L), listed by CA SFM Building Materials and accepted by NY Material and Equipment Acceptance Division. Firefree Coatings is a member of NPFA, ICC and ASTM E-05 Committee.

Firefree sells and ships products in all five continents for private, corporate and governmental projects, with customers and projects all over the world from the Americas (US, Canada, Mexico, Costa Rica, Venezuela…) to Asia (Australia, India, Indonesia, Philippines…) to Africa (Nigeria…) and the Middle East (Saudi Arabia, Oman, Kuwait…).

For further information, please contact at info@devfirefree.top, (888-990-3388) (+1 415-459-6488), www.firefree.com.

Firefree’s solution for cladding fires is based on Firefree 88’s existing testing on multiple substrates (metal, aluminum, polyurethane foam , gypsum, wood…) to a variety of standards including ASTM E 119, FM 4975, BS 476 , AS 1530 and EN 13501 and Room Corner tests (UBC-2, UBC 26-3, NFPA 286). Now Firefree 88 has passed a further set of tests, further validating such a retrofit solution.

The tests were conducted to the ASTM 1623 fire test standard, providing a “real world” extreme fire condition to determine the fire resistance of the sample panels in terms of maximum temperature exposure and time as an indication of performance in full scale testing under NFPA 285 the current testing standards currently being used for cladding panels.

The cladding panel, which was coated with FF88 per Firefree Coating’s solution (patent application filed), never got close to reaching the backside failure temperature of 121 C (250F) during the 60 minutes of the test. It reached an equilibrium temperature of 100 C (212 F) indicating a similar result would have been reached with the test extended to 120 minutes. By comparison the control cladding panel, which was not coated with FF88, reached the backside failure temperature of 121 C (250 F) in 6 minutes.

Firefree 88 can also be used in the manufacturing of new cladding panels resulting in non-combustible cladding with the same insulation quality and cost effective manufacturing.

For further information, please contact at info@devfirefree.top, (888-990-3388) (+1 415-459-6488), www.firefree.com.

Firefree has developed a retrofit solution (and filed a patent application) for the fire protection of both the interior and exterior of high-rise buildings utilizing combustible cladding.

This solution will not require an extensive retrofitting of the entire exterior cladding, in that no removal or replacement of the existing panels is required, effective fire protection is provided to both the inside and exterior, whether or not the building is protected with automatic sprinklers, and the exterior appearance of the building is not altered. This solution can be implemented in a timely, cost efficient manner without major displacement or disruption of the building occupants, or disruption of the building’s daily operations.

This approach focuses on the protection, utilizing Firefree 88, an intumescent coating on both the exterior and interior of the building. Applying Firefree 88 on the exterior of the building would protect the existing cladding from ignition from interior and exterior sources and would prevent the fire from spreading to other floors. Applying FF88 on specific walls and ceilings on the interior of the building would prevent interior fires to spread within the building within a floor or between floors, eventually reaching the exterior and the cladding.

Firefree 88 can also be used in the manufacturing of new cladding panels resulting in non-combustible cladding with the same insulation quality and cost effective manufacturing.

For further information, please contact at info@devfirefree.top, (888-990-3388) (+1 415-459-6488), www.firefree.com.

With the increase in the use of lithium ion batteries and the expanding size of battery packs comes a high level of fire hazards associated with the batteries, both in storage, use and transportation.

Firefree coatings have extensive testing on wood, thin gauge metal, carbon fiber and fiberglass composites, all materials used in lithium batteries shipping containers, power storage towers and vehicle battery storage areas.

Firefree Coatings has taken another step in passing testing on cardboard shipping containers. On cardboard boxes coated with Firefree 88 and loaded with lithium batteries, the coating was able to contain the battery fire to within the box and not let it expand outward into the additional boxes that made up the total shipping package of multiple sized boxes.

Additionally the testing on the boxes coated with Firefree 88 showed that the temperatures within a single box, or within a larger box containing multiple boxes did not exceed 400 degrees C within the batteries storage box space. The temperature on the cardboard boxes reach a maximum of 300 C within the heavily loaded smaller storage box, with additional temperature readings around additional boxes ranging from 30 C to 160 C within the larger cardboard box container in which multiple, smaller boxes were also placed.

For further information, please contact at info@devfirefree.top, (888-990-3388) (+1 415-459-6488), www.firefree.com.

Firefree 88 qualifies for LEED Version 4 credits. Firefree 88 is under LEED compliant paints and coatings in accordance to CDPH Standard Method v 1.2, 2017 emissions.

LEED Version 4 is the latest version of LEED. It went into effect in 2013 and is the only standard recognized for new buildings. Paints earn LEED V4 Low Emitting Materials credits for being emission certified in addition to meeting CARB SCM 2007 VOC limits.

Firefree’s LEED compliance builds on Firefree 88’s leading position as an environmentally friendly, green product. Firefree 88 is already eco-friendly as it qualifies as an MPI (Master Painter’s Institute) listed fire retardant paint meeting the stringent requirement for Green Standards Performance GPS-01 and GPS-02. Firefree 88 has also been green categorized under Factory Mutual 4975. This category allows FF88 to be considered sustainable. Building owners who rely on FM Approved Diamond now have FF88 to directly contribute to a building green certification.

For further information, please contact us at info@devfirefree.top, (888-990-3388) (+1 415-459-6488), www.firefree.com.

Firefree 88 has been granted a “Green” symbol under the Factory Mutual Approved umbrella. This symbol allows Firefree 88 to be considered sustainable. Factory Mutual (FM Approvals, www.fmapprovals.com), a division of FM Global, is a world leader in commercial property insurance and risk management. FM Approvals certifies products with a unique focus on rigorous testing and certification of loss prevention products and services.

This builds on Firefree 88’s leading position as an environmentally friendly, green product. Firefree 88 already qualifies as an MPI (Master Painter’s Institute) listed fire retardant paint meeting the stringent requirement for Green Performance Standards GPS-01 and GPS-02. Firefree’s green ecological listings enable Firefree 88 to reach the specific Green qualifications for Green Building design points towards the LEED certification of a building per SCAQMD. MPI interacts with critical environmental organizations such as US Green Building Council, LEED, LEED Canada, National Institute of Building Sciences and Environment Canada to verify and achieve Green Building Products Standards.

For further information, please contact at info@devfirefree.top (+1 415-459-6488), www.firefree.com.

Vulcan Vents obtained a listing from California State Fire Marshall for use in the Wildland Urban Interface wildfires, under category 8165 of the Building Material Listing Program.

Vulcan Vents have also successfully passed the ASTM Wildland Urban Interface (WUI) testing standards for ember and flame intrusion (ASTM E 2886 and ASTM E 2912). These standards, officially adopted and published, are applicable throughout the entire United States for any wildland fire area in which new or existing homes exist or are being built.

In addition to passing the WUI fire testing standards, the Vulcan Vents have also passed the one (1) hour fire test under the ASTM E 119 one (1) hour fire test standard. This standard is applicable in property side yard setback issues where a one (1) hour fire rating is being required.

Vulcan Vents are products of Vulcan Technologies, a partner of Firefree Coatings. Their vents use a Firefree proprietary intumescent product. They are the only vents that meet both the WUI and the one (1) hour fire test standards for the exterior of buildings while providing the proper amount of ventilation to attic and crawl spaces in building structures. The vents are easy to install in both new and retrofit conditions, are made of high quality materials and quality construction.

For further information, please contact vulcanvents@gmail.com or 415-459-6488, http://www.vulcantechnologies.com/.

Firefree 88 has been granted a new Factory Mutual Approval (FM 4975 Class testing). Such testing has shown a fire performance improved by over 25%, confirming Firefree 88’s leadership position as a fire retardant and fire resistant thin film intumescent coating.

Factory Mutual (FM Approvals, www.fmapprovals.com), a division of FM Global, is our partner in risk management. FM Global is a world leader in commercial property insurance and risk management. FM Approvals certifies products with a unique focus on rigorous testing and certification of loss prevention products and services.

For further information, please contact at info@devfirefree.top (+1 415-459-6488), wwwfirefree.com.